Serveur Web minimal utilisant netcat

J’essaie de configurer un serveur Web minimal en utilisant netcat (nc). Lorsque le navigateur appelle localhost: 1500, par exemple, il doit afficher le résultat d’une fonction ( date dans l’exemple ci-dessous, mais finalement ce sera un programme python ou c qui génère des données). Mon petit serveur web netcat doit être une boucle while true dans bash, peut-être aussi simple que cela:

while true ; do echo -e "HTTP/1.1 200 OK\n\n $(date)" | nc -l -p 1500 ; done 

Lorsque j’essaie ceci, le navigateur affiche les données actuellement disponibles au moment où nc démarre. Je souhaite que le navigateur affiche les données au moment où le navigateur le demande. Comment puis-je atteindre cet objective?

Essaye ça:

 while true ; do nc -l -p 1500 -c 'echo -e "HTTP/1.1 200 OK\n\n $(date)"'; done 

-c fait que netcat exécute la commande donnée dans un shell, vous pouvez donc utiliser echo. Si vous n’avez pas besoin d’écho, utilisez -e . Pour plus d’informations à ce sujet, essayez man nc . Notez que lorsque vous utilisez echo , votre programme (le remplacement de date ) n’a aucun moyen d’obtenir la requête du navigateur. Donc, vous voulez probablement faire quelque chose comme ceci:

 while true ; do nc -l -p 1500 -e /path/to/yourprogram ; done 

Où votre yourprogram doit faire le protocole comme gérer GET, envoyer HTTP 200 etc.

Donno comment ou pourquoi mais je parviens à trouver ça et ça marche pour moi, j’avais le problème je voulais retourner le résultat de l’exécution d’un bash

 $ while true; do { echo -e 'HTTP/1.1 200 OK\r\n'; sh test; } | nc -l 8080; done 

REMARQUE: cette commande provient de: http://www.razvantudorica.com/08/web-server-in-one-line-of-bash

cela exécute le test de script bash et renvoie le résultat à un client de navigateur se connectant au serveur exécutant cette commande sur le port 8080

Mon script fait cela ATM

 $ nano test #!/bin/bash echo "************PRINT SOME TEXT***************\n" echo "Hello World!!!" echo "\n" echo "Resources:" vmstat -SM echo "\n" echo "Addresses:" echo "$(ifconfig)" echo "\n" echo "$(gpio readall)" 

et mon navigateur Web montre

 ************PRINT SOME TEXT*************** Hello World!!! Resources: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- rb swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 314 18 78 0 0 2 1 306 31 0 0 100 0 Addresses: eth0 Link encap:Ethernet HWaddr b8:27:eb:86:e8:c5 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Mesortingc:1 RX packets:27734 errors:0 dropped:0 overruns:0 frame:0 TX packets:26393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1924720 (1.8 MiB) TX bytes:3841998 (3.6 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Mesortingc:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) GPIOs: +----------+-Rev2-+------+--------+------+-------+ | wiringPi | GPIO | Phys | Name | Mode | Value | +----------+------+------+--------+------+-------+ | 0 | 17 | 11 | GPIO 0 | IN | Low | | 1 | 18 | 12 | GPIO 1 | IN | Low | | 2 | 27 | 13 | GPIO 2 | IN | Low | | 3 | 22 | 15 | GPIO 3 | IN | Low | | 4 | 23 | 16 | GPIO 4 | IN | Low | | 5 | 24 | 18 | GPIO 5 | IN | Low | | 6 | 25 | 22 | GPIO 6 | IN | Low | | 7 | 4 | 7 | GPIO 7 | IN | Low | | 8 | 2 | 3 | SDA | IN | High | | 9 | 3 | 5 | SCL | IN | High | | 10 | 8 | 24 | CE0 | IN | Low | | 11 | 7 | 26 | CE1 | IN | Low | | 12 | 10 | 19 | MOSI | IN | Low | | 13 | 9 | 21 | MISO | IN | Low | | 14 | 11 | 23 | SCLK | IN | Low | | 15 | 14 | 8 | TxD | ALT0 | High | | 16 | 15 | 10 | RxD | ALT0 | High | | 17 | 28 | 3 | GPIO 8 | ALT2 | Low | | 18 | 29 | 4 | GPIO 9 | ALT2 | Low | | 19 | 30 | 5 | GPIO10 | ALT2 | Low | | 20 | 31 | 6 | GPIO11 | ALT2 | Low | +----------+------+------+--------+------+-------+ 

simplement extraordinaire!

Le problème auquel vous êtes confronté est que nc ne sait pas quand le client Web a terminé sa requête pour pouvoir répondre à la demande.
Une session Web devrait aller quelque chose comme ça.

 TCP session is established. Browser Request Header: GET / HTTP/1.1 Browser Request Header: Host: www.google.com Browser Request Header: \n #Note: Browser is telling Webserver that the request header is complete. Server Response Header: HTTP/1.1 200 OK Server Response Header: Content-Type: text/html Server Response Header: Content-Length: 24 Server Response Header: \n #Note: Webserver is telling browser that response header is complete Server Message Body: sample html Server Message Body: \n #Note: Webserver is telling the browser that the requested resource is finished. The server closes the TCP session. 

Les lignes commençant par “\ n” sont simplement des lignes vides sans même un espace et ne contiennent rien de plus qu’un nouveau caractère de ligne.

J’ai mon bash httpd lancé par xinetd, tutoriel xinetd . Il enregistre également la date, l’heure, l’adresse IP du navigateur et l’intégralité de la requête du navigateur dans un fichier journal et calcule la longueur du contenu pour la réponse de l’en-tête du serveur.

 user@machine:/usr/local/bin# cat ./bash_httpd #!/bin/bash x=0; Log=$( echo -n "["$(date "+%F %T %Z")"] $REMOTE_HOST ")$( while read I[$x] && [ ${#I[$x]} -gt 1 ];do echo -n '"'${I[$x]} | sed -e's,.$,",'; let "x = $x + 1"; done ; ); echo $Log >> /var/log/bash_httpd Message_Body=$(echo -en 'Sample html') echo -en "HTTP/1.0 200 OK\nContent-Type: text/html\nContent-Length: ${#Message_Body}\n\n$Message_Body" 

Pour append plus de fonctionnalités, vous pouvez les intégrer.

  METHOD=$(echo ${I[0]} |cut -d" " -f1) REQUEST=$(echo ${I[0]} |cut -d" " -f2) HTTP_VERSION=$(echo ${I[0]} |cut -d" " -f3) If METHOD = "GET" ]; then case "$REQUEST" in "/") Message_Body="HTML formatted home page stuff" ;; /who) Message_Body="HTML formatted results of who" ;; /ps) Message_Body="HTML formatted results of ps" ;; *) Message_Body= "Error Page not found header and content" ;; esac fi 

Heureux bashing!

Ajoutez -q 1 à la ligne de commande netcat :

 while true; do echo -e "HTTP/1.1 200 OK\n\n $(date)" | nc -l -p 1500 -q 1 done 

J’ai eu le même besoin / problème mais rien ici n’a fonctionné pour moi (ou je n’ai pas tout compris), alors c’est ma solution.

Je poste mon minimal_http_server.sh (en travaillant avec mon / bin / bash (4.3.11) mais pas avec / bin / sh à cause de la redirection):

 rm -f out mkfifo out trap "rm -f out" EXIT while true do cat out | nc -l 1500 > >( # parse the netcat output, to build the answer redirected to the pipe "out". export REQUEST= while read -r line do line=$(echo "$line" | tr -d '\r\n') if echo "$line" | grep -qE '^GET /' # if line starts with "GET /" then REQUEST=$(echo "$line" | cut -d ' ' -f2) # extract the request elif [ -z "$line" ] # empty line / end of request then # call a script here # Note: REQUEST is exported, so the script can parse it (to answer 200/403/404 status code + content) ./a_script.sh > out fi done ) done 

Et mon a_script.sh (avec votre besoin):

 #!/bin/bash echo -e "HTTP/1.1 200 OK\r" echo "Content-type: text/html" echo date 

Une autre façon de le faire

 while true; do (echo -e 'HTTP/1.1 200 OK\r\n'; echo -e "\n\tMy website has date function" ; echo -e "\t$(date)\n") | nc -lp 8080; done 

Testons-le avec 2 requêtes HTTP en utilisant curl

Dans cet exemple, 172.16.2.6 est l’adresse IP du serveur.

Du côté serveur

 admin@server:~$ while true; do (echo -e 'HTTP/1.1 200 OK\r\n'; echo -e "\n\tMy website has date function" ; echo -e "\t$(date)\n") | nc -lp 8080; done GET / HTTP/1.1 Host: 172.16.2.6:8080 User-Agent: curl/7.48.0 Accept: */* GET / HTTP/1.1 Host: 172.16.2.6:8080 User-Agent: curl/7.48.0 Accept: */* 

Côté client

 user@client:~$ curl 172.16.2.6:8080 My website has date function Tue Jun 13 18:00:19 UTC 2017 user@client:~$ curl 172.16.2.6:8080 My website has date function Tue Jun 13 18:00:24 UTC 2017 user@client:~$ 

Si vous souhaitez exécuter une autre commande, n’hésitez pas à remplacer $ (date).

 mkfifo pipe; while true ; do #use read line from pipe to make it blocks before request comes in, #this is the key. { read line pipe; done 

Voici une beauté d’ un petit serveur web bash , je l’ai trouvé en ligne et j’ai créé une copie et l’a redimensionné un peu – il utilise socat ou netcat je l’ai testé avec socat – il est autonome dans un script et génère son propre fichier de configuration et favicon.

Par défaut, il démarre en tant que navigateur de fichiers compatible Web, mais il est facile à configurer par le fichier de configuration pour toute logique. Pour les fichiers, il diffuse des images et de la musique (mp3), de la vidéo (mp4, avi, etc.) – J’ai testé divers types de fichiers sur des appareils Linux, Windows et Android, y compris une smartwatch!

Je pense qu’il diffuse mieux que VLC. Je l’ai trouvé utile pour transférer des fichiers à des clients distants qui n’ont pas access au-delà d’un navigateur Web, par exemple Android smartwatch, sans avoir à se soucier de la connexion physique à un port USB.

Si vous voulez l’essayer, copiez et collez-le dans un fichier nommé bashttpd, puis lancez-le sur l’hôte avec $> bashttpd -s

Vous pouvez ensuite aller sur n’importe quel autre ordinateur (en supposant que le pare-feu ne bloque pas les connexions TCP entrantes au port 8080 – le port par défaut, vous pouvez changer le port en fonction des variables globales en haut du script). http://bashttpd_server_ip:8080

 #!/usr/bin/env bash ############################################################################# ########################################################################### ### bashttpd v 1.12 ### ### Original author: Avleen Vig, 2012 ### Reworked by: Josh Cartwright, 2012 ### Modified by: AMDanischewski, 2015 ### Issues: If you find any issues leave me a comment at ### http://scriptsandoneliners.blogspot.com/2015/04/bashttpd-self-contained-bash-webserver.html ### ### This is a simple Bash based webserver. By default it will browse files and allows for ### resortingeving binary files. ### ### It has been tested successfully to view and stream files including images, mp3s, ### mp4s and downloading files of any type including binary and compressed files via ### any web browser. ### ### Successfully tested on various browsers on Windows, Linux and Android devices (including the ### Android Smartwatch ZGPAX S8). ### ### It handles favicon requests by hardcoded favicon image -- by default a marathon ### runner; change it to whatever you want! By base64 encoding your favorit favicon ### and changing the global variable below this header. ### ### Make sure if you have a firewall it allows connections to the port you plan to ### listen on (8080 by default). ### ### By default this program will allow for the browsing of files from the ### computer where it is run. ### ### Make sure you are allowed connections to the port you plan to listen on ### (8080 by default). Then just drop it on a host machine (that has bash) ### and start it up like this: ### ### $192.168.1.101> bashttpd -s ### ### On the remote machine you should be able to browse and download files from the host ### server via any web browser by visiting: ### ### http://192.168.1.101:8080 ### #### This program requires (to work to full capacity) by default: ### socat or netcat (w/ '-e' option - on Ubuntu netcat-traditional) ### tree - useful for pretty directory listings ### If you are using socat, you can type: bashttpd -s ### ### to start listening on the LISTEN_PORT (default is 8080), you can change ### the port below. ### Eg nc -lp 8080 -e ./bashttpd ## <-- If your nc has the -e option. ### Eg nc.traditional -lp 8080 -e ./bashttpd ### Eg bashttpd -s -or- socat TCP4-LISTEN:8080,fork EXEC:bashttpd ### ### Copyright (C) 2012, Avleen Vig  ### ### Permission is hereby granted, free of charge, to any person obtaining a copy of ### this software and associated documentation files (the "Software"), to deal in ### the Software without ressortingction, including without limitation the rights to ### use, copy, modify, merge, publish, dissortingbute, sublicense, and/or sell copies of ### the Software, and to permit persons to whom the Software is furnished to do so, ### subject to the following conditions: ### ### The above copyright notice and this permission notice shall be included in all ### copies or substantial portions of the Software. ### ### THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR ### IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS ### FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR ### COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER ### IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN ### CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ### ########################################################################### ############################################################################# ### CHANGE THIS TO WHERE YOU WANT THE CONFIGURATION FILE TO RESIDE declare -r BASHTTPD_CONF="/tmp/bashttpd.conf" ### CHANGE THIS IF YOU WOULD LIKE TO LISTEN ON A DIFFERENT PORT declare -i LISTEN_PORT=8080 ## If you are on AIX, IRIX, Solaris, or a hardened system redirecting ## to /dev/random will probably break, you can change it to /dev/null. declare -a DUMP_DEV="/dev/random" ## Just base64 encode your favorite favicon and change this to whatever you want. declare -r FAVICON="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" declare -i DEBUG=1 declare -i VERBOSE=0 declare -a REQUEST_HEADERS declare REQUEST_URI="" declare -a HTTP_RESPONSE=( [200]="OK" [400]="Bad Request" [403]="Forbidden" [404]="Not Found" [405]="Method Not Allowed" [500]="Internal Server Error") declare DATE=$(date +"%a, %d %b %Y %H:%M:%S %Z") declare -a RESPONSE_HEADERS=( "Date: $DATE" "Expires: $DATE" "Server: Slash Bin Slash Bash" ) function warn() { ((${VERBOSE})) && echo "WARNING: $@" >&2; } function chk_conf_file() { [ -r "${BASHTTPD_CONF}" ] || { cat >"${BASHTTPD_CONF}" <<'EOF' # # bashttpd.conf - configuration for bashttpd # # The behavior of bashttpd is dictated by the evaluation # of rules specified in this configuration file. Each rule # is evaluated until one is matched. If no rule is matched, # bashttpd will serve a 500 Internal Server Error. # # The format of the rules are: # on_uri_match REGEX command [args] # unconditionally command [args] # # on_uri_match: # On an incoming request, the URI is checked against the specified # (bash-supported extended) regular expression, and if encounters a match the # specified command is executed with the specified arguments. # # For additional flexibility, on_uri_match will also pass the results of the # regular expression match, ${BASH_REMATCH[@]} as additional arguments to the # command. # # unconditionally: # Always serve via the specified command. Useful for catchall rules. # # The following commands are available for use: # # serve_file FILE # Statically serves a single file. # # serve_dir_with_tree DIRECTORY # Statically serves the specified directory using 'tree'. It must be # installed and in the PATH. # # serve_dir_with_ls DIRECTORY # Statically serves the specified directory using 'ls -al'. # # serve_dir DIRECTORY # Statically serves a single directory listing. Will use 'tree' if it is # installed and in the PATH, otherwise, 'ls -al' # # serve_dir_or_file_from DIRECTORY # Serves either a directory listing (using serve_dir) or a file (using # serve_file). Constructs local path by appending the specified root # directory, and the URI portion of the client request. # # serve_static_string STRING # Serves the specified static string with Content-Type text/plain. # # Examples of rules: # # on_uri_match '^/issue$' serve_file "/etc/issue" # # When a client's requested URI matches the string '/issue', serve them the # contents of /etc/issue # # on_uri_match 'root' serve_dir / # # When a client's requested URI has the word 'root' in it, serve up # a directory listing of / # # DOCROOT=/var/www/html # on_uri_match '/(.*)' serve_dir_or_file_from "$DOCROOT" # When any URI request is made, attempt to serve a directory listing # or file content based on the request URI, by mapping URI's to local # paths relative to the specified "$DOCROOT" # #unconditionally serve_static_string 'Hello, world! You can configure bashttpd by modifying bashttpd.conf.' DOCROOT=/ on_uri_match '/(.*)' serve_dir_or_file_from # More about commands: # # It is possible to somewhat easily write your own commands. An example # may help. The following example will serve "Hello, $x!" whenever # a client sends a request with the URI /say_hello_to/$x: # # serve_hello() { # add_response_header "Content-Type" "text/plain" # send_response_ok_exit <<< "Hello, $2!" # } # on_uri_match '^/say_hello_to/(.*)$' serve_hello # # Like mentioned before, the contents of ${BASH_REMATCH[@]} are passed # to your command, so its possible to use regular expression groups # to pull out info. # # With this example, when the requested URI is /say_hello_to/Josh, serve_hello # is invoked with the arguments '/say_hello_to/Josh' 'Josh', # (${BASH_REMATCH[0]} is always the full match) EOF warn "Created bashttpd.conf using defaults. Please review and configure bashttpd.conf before running bashttpd again." # exit 1 } } function recv() { ((${VERBOSE})) && echo "< $@" >&2; } function send() { ((${VERBOSE})) && echo "> $@" >&2; echo "$*"; } function add_response_header() { RESPONSE_HEADERS+=("$1: $2"); } function send_response_binary() { local code="$1" local file="${2}" local transfer_stats="" local tmp_stat_file="/tmp/_send_response_$$_" send "HTTP/1.0 $1 ${HTTP_RESPONSE[$1]}" for i in "${RESPONSE_HEADERS[@]}"; do send "$i" done send if ((${VERBOSE})); then ## Use dd since it handles null bytes dd 2>"${tmp_stat_file}" < "${file}" transfer_stats=$(<"${tmp_stat_file}") echo -en ">> Transferred: ${file}\n>> $(awk '/copied/{print}' <<< "${transfer_stats}")\n" >&2 rm "${tmp_stat_file}" else ## Use dd since it handles null bytes dd 2>"${DUMP_DEV}" < "${file}" fi } function send_response() { local code="$1" send "HTTP/1.0 $1 ${HTTP_RESPONSE[$1]}" for i in "${RESPONSE_HEADERS[@]}"; do send "$i" done send while IFS= read -r line; do send "${line}" done } function send_response_ok_exit() { send_response 200; exit 0; } function send_response_ok_exit_binary() { send_response_binary 200 "${1}"; exit 0; } function fail_with() { send_response "$1" <<< "$1 ${HTTP_RESPONSE[$1]}"; exit 1; } function serve_file() { local file="$1" local CONTENT_TYPE="" case "${file}" in *\.css) CONTENT_TYPE="text/css" ;; *\.js) CONTENT_TYPE="text/javascript" ;; *) CONTENT_TYPE=$(file -b --mime-type "${file}") ;; esac add_response_header "Content-Type" "${CONTENT_TYPE}" CONTENT_LENGTH=$(stat -c'%s' "${file}") add_response_header "Content-Length" "${CONTENT_LENGTH}" ## Use binary safe transfer method since text doesn't break. send_response_ok_exit_binary "${file}" } function serve_dir_with_tree() { local dir="$1" tree_vers tree_opts basehref x ## HTML 5 compatible way to avoid tree html from generating favicon ## requests in certain browsers, such as browsers in android smartwatches. =) local no_favicon=" " local tree_page="" local base_server_path="/${2%/}" [ "$base_server_path" = "/" ] && base_server_path=".." local tree_opts="--du -h -a --dirsfirst" add_response_header "Content-Type" "text/html" # The --du option was added in 1.6.0. "/${2%/*}" read _ tree_vers x < <(tree --version) tree_page=$(tree -H "$base_server_path" -L 1 "${tree_opts}" -D "${dir}") tree_page=$(sed "5 i ${no_favicon}" <<< "${tree_page}") [[ "${tree_vers}" == v1.6* ]] send_response_ok_exit <<< "${tree_page}" } function serve_dir_with_ls() { local dir="$1" add_response_header "Content-Type" "text/plain" send_response_ok_exit < \ <(ls -la "${dir}") } function serve_dir() { local dir="$1" # If `tree` is installed, use that for pretty output. which tree &>"${DUMP_DEV}" && \ serve_dir_with_tree "$@" serve_dir_with_ls "$@" fail_with 500 } function urldecode() { [ "${1%/}" = "" ] && echo "/" || echo -e "$(sed 's/%\([[:xdigit:]]\{2\}\)/\\\x\1/g' <<< "${1%/}")"; } function serve_dir_or_file_from() { local URL_PATH="${1}/${3}" shift URL_PATH=$(urldecode "${URL_PATH}") [[ $URL_PATH == *..* ]] && fail_with 400 # Serve index file if exists in requested directory [[ -d "${URL_PATH}" && -f "${URL_PATH}/index.html" && -r "${URL_PATH}/index.html" ]] && \ URL_PATH="${URL_PATH}/index.html" if [[ -f "${URL_PATH}" ]]; then [[ -r "${URL_PATH}" ]] && \ serve_file "${URL_PATH}" "$@" || fail_with 403 elif [[ -d "${URL_PATH}" ]]; then [[ -x "${URL_PATH}" ]] && \ serve_dir "${URL_PATH}" "$@" || fail_with 403 fi fail_with 404 } function serve_static_string() { add_response_header "Content-Type" "text/plain" send_response_ok_exit <<< "$1" } function on_uri_match() { local regex="$1" shift [[ "${REQUEST_URI}" =~ $regex ]] && \ "$@" "${BASH_REMATCH[@]}" } function unconditionally() { "$@" "$REQUEST_URI"; } function main() { local recv="" local line="" local REQUEST_METHOD="" local REQUEST_HTTP_VERSION="" chk_conf_file [[ ${UID} = 0 ]] && warn "It is not recommended to run bashttpd as root." # Request-Line HTTP RFC 2616 $5.1 read -r line || fail_with 400 line=${line%%$'\r'} recv "${line}" read -r REQUEST_METHOD REQUEST_URI REQUEST_HTTP_VERSION <<< "${line}" [ -n "${REQUEST_METHOD}" ] && [ -n "${REQUEST_URI}" ] && \ [ -n "${REQUEST_HTTP_VERSION}" ] || fail_with 400 # Only GET is supported at this time [ "${REQUEST_METHOD}" = "GET" ] || fail_with 405 while IFS= read -r line; do line=${line%%$'\r'} recv "${line}" # If we've reached the end of the headers, break. [ -z "${line}" ] && break REQUEST_HEADERS+=("${line}") done } if [[ ! -z "{$1}" ]] && [ "${1}" = "-s" ]; then socat TCP4-LISTEN:${LISTEN_PORT},fork EXEC:"${0}" else main source "${BASHTTPD_CONF}" fail_with 500 fi 

LOL, un piratage super boiteux, mais au moins curl et firefox l’accepte:

 while true ; do (dd if=/dev/zero count=10000;echo -e "HTTP/1.1\n\n $(date)") | nc -l 1500 ; done 

Vous feriez mieux de le remplacer rapidement par quelque chose de bien!

Ah oui, ma nc n’était pas exactement la même que la vôtre, elle n’aimait pas l’option -p .

Tapez nc -h et voyez si l’option -e est disponible. Si oui, vous pouvez créer un script, par exemple:

script.sh

 echo -e "HTTP/1.1 200 OK\n\n $(date)" 

et lancez-le comme ceci:

 while true ; do nc -l -p 1500 -e script.sh; done 

Notez que l’option -e doit être activée lors de la compilation pour être disponible.

Je pense que le problème que toute la solution listée ne fonctionne pas, est insortingnsèque à la nature du service http, que chaque requête établie est avec un client différent et que la réponse doit être traitée dans un contexte différent, chaque requête doit générer un nouveau exemple de réponse …

Je pense que la solution actuelle est le -e de netcat mais je ne sais pas pourquoi ça ne marche pas … peut-être est-ce ma version nc que je teste sur openwrt

avec socat ça marche ….

J’essaie ceci https://github.com/avleen/bashttpd

et ça marche, mais je dois exécuter le script shell avec cette commande.

 socat tcp-l:80,reuseaddr,fork EXEC:bashttpd & 

Les socat et netcat sur github ne fonctionnent pas pour moi, mais le socat que j’ai utilisé fonctionne.

Si vous utilisez Apline Linux, le netcat de BusyBox est légèrement différent:

 while true; do nc -l -p 8080 -e sh -c 'echo -e "HTTP/1.1 200 OK\n\n$(date)"'; done